HELIXX™ Poly
Advanced Salt Delivery
Forget everything you thought you knew about poly spreaders. Available in capacities from 1.5 to 5.0 cu yd, the HELIXX Poly Hopper Spreaders are a from-the-ground-up design based on extensive testing and three decades of SnowEx® hopper spreader innovation. The exclusive material delivery system vastly outperforms traditional augers, delivering unmatched material flow.
Poly Hopper Spreader
Capacity: 1.5, 2.25, 3.5 & 5.0 cu yd
Materials: Salt
Spread Pattern: Broadcast
Poly Hopper Spreader
Capacity: 1.5, 2.25, 3.5 & 5.0 cu yd
Materials: Salt
Spread Pattern: Broadcast
Features:
• HELIXX Advanced Material Delivery: The patent-pending corkscrew – or “helix” – design of the HELIXX material delivery system is optimized for efficient and cost-effective use of salt and was designed to operate in the target range for salt spreading best practices. The innovative design helps prevent clogs and delivers a material flow superior to traditional augers.
• Full Length HELIXX and Multi-Dimensional Tub: The HELIXX runs the entire length of the hopper with variable flights. Combined with strategically positioned ribs/angles within the poly tub walls, this promotes the best possible material flow and even unloading.
• Triple Threat: Spread, pre-wet or spray with one machine. By adding pre-wet tanks, a pump and a spray kit, the HELIXX spreaders not only pre-wet materials, but they can also be used for spraying liquid brine directly onto the driving surface for anti-icing applications. The components offer a simple plug-and-play installation, meaning a contractor can upgrade to pre-wetting or direct liquid applications at any time.
• Cab Forward Design: The cab forward hopper delivers better payload distribution to reduce stress on the truck.
• Material Leak/Spill Prevention: The HELIXX extends beyond the hopper and into the patented pre-wet mixing chamber to help prevent leaking/spilling during transport while providing an ideal location for pre-wetting material.
• Stainless Steel Frame: Constructed of corrosion-resistant stainless steel, the frame features a unique leg and sill design to form a ridged backbone structure for greater durability.
• Chute Baffle System: Baffles within the chute direct material to key areas on the spinner resulting in a remarkably even and consistent spread pattern, as well as reducing material directed back at the vehicle.
• Spinner Height Adjustment: Three spinner height adjustments allow spreaders to achieve a consistent spinner height of 18 to 22 inches off the ground, regardless of vehicle type (Standard on 11800 and 11810 models).
• Dual Variable-Speed Control: Allows for variable control of spinner and HELIXX system speeds for precise material delivery, whether at low or high output. Features auto reverse and integrates with accessories (including pre-wet and direct liquid application).
• Simple Installation: Only requires a single 4-pin wire routed into the cab to install the compact control.
• Fleet Flex: The FLEET FLEX electrical system provides a consistent electrical platform and complete fleet interchangeability between all HELIXX spreaders.
• No-Blast Startup: For maximum material placement and control, the spinner doesn’t blast upon startup, instead starting at the desired speed setting on the dial.
• Full Length HELIXX and Multi-Dimensional Tub: The HELIXX runs the entire length of the hopper with variable flights. Combined with strategically positioned ribs/angles within the poly tub walls, this promotes the best possible material flow and even unloading.
• Triple Threat: Spread, pre-wet or spray with one machine. By adding pre-wet tanks, a pump and a spray kit, the HELIXX spreaders not only pre-wet materials, but they can also be used for spraying liquid brine directly onto the driving surface for anti-icing applications. The components offer a simple plug-and-play installation, meaning a contractor can upgrade to pre-wetting or direct liquid applications at any time.
• Cab Forward Design: The cab forward hopper delivers better payload distribution to reduce stress on the truck.
• Material Leak/Spill Prevention: The HELIXX extends beyond the hopper and into the patented pre-wet mixing chamber to help prevent leaking/spilling during transport while providing an ideal location for pre-wetting material.
• Stainless Steel Frame: Constructed of corrosion-resistant stainless steel, the frame features a unique leg and sill design to form a ridged backbone structure for greater durability.
• Chute Baffle System: Baffles within the chute direct material to key areas on the spinner resulting in a remarkably even and consistent spread pattern, as well as reducing material directed back at the vehicle.
• Spinner Height Adjustment: Three spinner height adjustments allow spreaders to achieve a consistent spinner height of 18 to 22 inches off the ground, regardless of vehicle type (Standard on 11800 and 11810 models).
• Dual Variable-Speed Control: Allows for variable control of spinner and HELIXX system speeds for precise material delivery, whether at low or high output. Features auto reverse and integrates with accessories (including pre-wet and direct liquid application).
• Simple Installation: Only requires a single 4-pin wire routed into the cab to install the compact control.
• Fleet Flex: The FLEET FLEX electrical system provides a consistent electrical platform and complete fleet interchangeability between all HELIXX spreaders.
• No-Blast Startup: For maximum material placement and control, the spinner doesn’t blast upon startup, instead starting at the desired speed setting on the dial.